HF Reader products are 13.56 MHz RFID integrated circuits incorporating physical layers of ISO and other protocols according to below table. Adding a simple low-cost 8-bit microcontroller completes a high-performance reader system for numerous proximity and vicinity RFID applications.
Selection Guide
| HF Reader IC |
Protocols |
Supply
Voltage |
Temp.
Range |
Output
Power |
Package |
Status |
Development
Kits |
| R13MP |
ISO 14443A/B
ISO 15693
FeliCa, Tag-it |
5V
2.7-5.5V |
-40°C
to
110°C |
Max. 200mW |
QFN32 (5x5mm) |
Active |
DK-HF RFID MP |
| R14AB |
ISO 14443A/B
NFCIP-1 (p2p) |
3.3V
2.4-3.6V |
-40°C
to
85°C |
Max. 800mW |
QFN32 (5x5mm) |
Active |
DK-R14AB |
Did you know
All our reader circuits have fully integrated supply regulators, which prevent interference, assure high PSRR and contribute to reduction of BOM. Physical protocol layers with all timing-critical functions are integrated into the reader chip. This reduces the overall power consumption of a reader system considerably as only the timing-uncritical and asynchronous application firmware needs to be implemented into the host/system MCU.
|
